افزایش HDMI+LAN+RS232 روی یک کابل شبکه تا ۱۰۰متر + ریموت HDMI+LAN+RS232 Extender over Single Cat6 100m+IR (HDBasetT)

Introduction
The cat5e/cat6 HDMI Extender is a tool which can extend your HDMI signal over 328fts/100meters to a compatible display. It is designed to convert HDMI signal to standard HD BaseT signal which can be transmitted by Internet cable. It also supports Transfer Bidirectional Infrared control signal \RS232 control signal\Internet signal together with the HDMI signal, so you can control the Source in the Sink side which is 328fts outside, also you can control the Sink in the Source side which is 328fts outside using the HDMI Extender.

Features
POE(Power Over Ethernet)function support, either TX or RX powered 24V@1A,another do not need power form the DC jack. POE Power Consumption less than 10W. ※ See the description 1
Use single UTP LAN cable (CAT-5E/6) to substitute HDMI cable to achieve long distances transmission.
UTP cable termination follows the standard of IEEE-568A or IEEE-568B.
Transmission distance: ※Over CAT6 cable
۱۰۰ meters: 1080P @60Hz36bit; 3D1080P@30Hz36bit;
۷۰ meters: 1080P @60Hz@48bit; 1080P @120Hz@24bit; 3D1080P@60Hz@36bit; 4K x 2K@30Hz@24bit.
Support display resolutions up to 4K x 2K@30Hz
Full HD support: 1080p@60Hz@48 bit/pixels, 1080p@120Hz@24 bit/pixels, 3D 1080P60Hz and 4K x 2K@30Hz@24bit
Transfer Bidirectional Infrared control signal together with the HDMI signal.
Transfer Bidirectional RS232 control signal together with the HDMI signal.
Transfer Bidirectional Ethernet signal together with the HDMI signal.